APRILIA MSS Mana GT ABS Service Station Manual page 253

MSS Mana GT ABS
Driving pulley components check
- Check that the internal bushings are not abnor-
mally worn and measure their inside diameter.
CAUTION
DO NOT LUBRICATE OR CLEAN BUSHINGS
Characteristic
Max. diameter admitted
40.050 mm
Standard diameter
40.000 +0.034 -0.009 mm
- Check that the internal bushing is not abnormally
worn and measure its inside diameter.
CAUTION
DO NOT LUBRICATE OR CLEAN BUSHINGS
Characteristic
Max. diameter admitted
35.050 mm
Standard diameter
35.000 +0.034 -0.009 mm
- Measure the outside diameter of the sliding bush-
ing.
Characteristic
Minimum outside diameter admitted
34.055 mm
Standard diameter
35.000 -0.015 -0.040 mm
- Measure the spacer outside diameter.
Characteristic
Minimum outside diameter admitted
39.055 mm
Standard diameter
40.000 -0.015 -0.040 mm
Engine
ENG - 253