APRILIA MSS Mana GT ABS Service Station Manual page 116

Electrical system
Transmission control unit
Function
It controls the TRANSMISSION system.
Operation / Operating principle
It receives information from the sensors connected to it and, via CAN line communication with the
instrument panel and the injection control unit, it controls the predetermined operating strategies for the
position of the driving pulley in order to obtain the gear ratio requested by the user (manual transmission)
or expected according to the kind of calibration of the selected gear (automatic transmission).
Level in wiring diagram: transmission management
Position:
•
on the vehicle: between the helmet compartment and the saddle
•
connector (if available): on the control unit
Electrical specifications: -
Pin-out: see the CONNECTORS section
CAUTION
BEFORE CARRYING OUT ANY TROUBLESHOOTING, CAREFULLY READ THE GENERAL TROU-
BLESHOOTING CONCEPTS FOR ELECTRICAL DEVICES AT THE BEGINNING OF THE CHECK
AND CONTROL SECTION IN THE ELECTRICAL SYSTEM CHAPTER.
AXONE / AUTOMATIC TRANSMISSION system
ISO SCREEN PAGE
Hardware number - Example value: 04
Hardware version number - Example value:0004
Software number - Example value:04
Software release number - Example value:0033
NOTES - Control unit mapping
PARAMETERS
Automatic system
Temperature inside the control unit
Example value: °C
There is a sensor inside the control unit.
Maximum value reached by the temperature inside the control unit
ELE SYS - 116
MSS Mana GT ABS