APRILIA MSS Mana GT ABS Service Station Manual page 353

MSS Mana GT ABS
Cooling system
- Before removal, clean thoroughly all the parts.
- Place the extractor complete with pin on the static
part of the ceramic seal.
- Without modifying the extractor position, make
three holes on the static part of the seal using the
pin supplied and a hammer.
NOTE
MAKE THE HOLES WITH A STRONG HIT.
MULTIPLE BLOWS COULD DEFORM THE PART WITHOUT
PASSING THROUGH.
- Fasten the extractor to the static part of the seal-
ing, using the screws supplied with the tool.
CAUTION
FASTEN IT CORRECTLY WITHOUT "TEARING" THE
PLATE
COOL SYS - 353