APRILIA MSS Mana GT ABS Service Station Manual page 240

Engine
- Fit the bearings on the specific tools and refit the
new bearings.
Specific tooling
020376Y Adapter handle
020441Y Oil seal punch
020455Y 10-mm guide for oil seal on water
pump shaft
Gearshift control shaft removal
- Undo the screw and collect the two washers, the
plate, the O-ring, the two balls and the spring.
- Slide off the assembled gear control shaft, collect
the washer and the O-Ring.
Removing the driven pulley
See also
ENG - 240
MSS Mana GT ABS