Electrical system
•
If the initial position of the connector
and the driving lever is not that shown
in fig. 1, the connector will not be prop-
erly coupled and the distance meas-
ured will be greater (12 mm approx.
(0.47 in)). In this case repeat the oper-
ation as described in the two previous
points.
IT IS ADVISABLE TO CREATE A TEMPLATE
TO CHECK THE CORRECT CONNECTOR IN-
SERTION.
•
Insert the housing as shown in the fig-
ure.
Can line
CAN line
Function
It allows communication between the Marelli injection control unit, the transmission ECU and the in-
strument panel.
Level in wiring diagram:CAN line
Pin-out: see wiring diagram
AXONE / AUTOMATIC TRANSMISSION system:
ERRORS
"Mute Node" CAN Line, U1601 - Mute Node.
Error cause
ELE SYS - 146
MSS Mana GT ABS