MSS Mana GT ABS
•
Remove the exhaust manifold of the
front cylinder.
CAUTION
UPON REFITTING, TIGHTEN THE CLAMP LOCKING NUT
TO THE PRESCRIBED TORQUE.
Locking torques (N*m)
Manifolds fixing clamp (2)
REAR CYLINDER MANIFOLD
•
Loosen the nut tightening the flange.
•
Move the flange.
•
Remove the exhaust manifold of the
rear cylinder.
CAUTION
UPON REFITTING, TIGHTEN THE CLAMP LOCKING NUT
TO THE PRESCRIBED TORQUE.
Locking torques (N*m)
Manifolds fixing clamp (2)
18 Nm (13.28 lbf ft)
18 Nm (13.28 lbf ft)
Chassis
CHAS - 319