Updating Firmware - Extron electronics MediaPort 200 User Manual

Changing the device name
1. Click the button (see figure 97
Edit
Figure 98. Device Name Dialog Box
2. Enter a name for the MediaPort device. To reset the name to the factory default,
click
Reset to Default
3.
Click to confirm the new name and close the dialog box.
Apply

Updating firmware

The current firmware version number is displayed in the
figure 97 above) of the
2 Device
1. Click the button (
Update
2.
In the dialog box, click the
firmware file on the computer (by default the file is stored at
C:\Program Files (x86)\Extron\Firmware\MediaPort
file name in the
Firmware
Figure 99. Firmware Update Dialog Box
3. Click to begin. During the updating process, a message window appears
Update
in the middle of the screen, showing the progress of the update:
Installing the Firmware
Figure 100. Firmware Update Message Window
above). The following dialog box opens:
1
.
Info panel.
). The
3 Firmware Update
button to locate the
Browse
field (see figure 99 below).
, and
Rebooting Device
MediaPort 200 • Remote Configuration and Control
field (see
Firmware Version
dialog box opens.
) or enter the firmware
Initializing
.
,
153