Extron electronics MediaPort 200 User Manual page 74

Figure 67 below provides an overview of the
Quick
Setup
Menu
Input Rotate either
Presets knob to select a setting.
Next
Recall Preset
Next
<N/A>
Select an input preset.
• N/A (Default)
Range: 1-16
•
Figure 67. Input Presets Menu
Saving or Recalling an Input Preset
1. Press the button on the front panel until
Menu
window.
2. Press the button until the desired submenu name is displayed:
Next
.
Save Preset
3. Rotate either knob until the LCD screen displays the desired number of the user
Adjust
image preset to save the current settings to, or to be recalled.
4.
Press to save or recall the preset. When the operation is completed, the
Next
menu reappears.
Presets
To exit the input presets function without saving a preset, press
NOTES:
• The user image preset name can be assigned only using SIS commands
(see Input Preset Name
MediaPort 200 Help file).
• User image presets can be saved at one input resolution and rate and recalled
to a different one.
Example: If the current output resolution is 640x480 and a 720p input is
applied, size and center a "letterbox" image for a 16:9 input resolution and save
it to an user image preset. Subsequently, if a 1080p resolution is applied to the
unit, the letterbox preset that was saved at 720p can be recalled with the new
1080p input resolution.
menu and submenus.
Input Presets
Adjust
Save Preset
<Unassigned>
Next
Save the current input
settings to a preset.
Unassigned (Default)
•
Range: 1-16
•
Input Presets
on page 126) or the PCS control software (see the
MediaPort 200 • Front Panel Operation
is displayed in the LCD
or
Recall Preset
Input
.
Menu
67