Picture Control - Extron electronics MediaPort 200 User Manual

Command
HDCP Authorized — Input Reporting as an HDCP Authorized Device
Enable HDCP
authorized
Disable HDCP
authorized
View HDCP authorized
status
HDCP Status
View HDCP status for
the input
View HDCP status for
the output

Picture Control

Contrast
Set a specific contrast
value
Increment contrast
value
Decrement contrast
value
View contrast value
NOTES:
= Picture adjustment (brightness and contrast):
X1%
=
X4$ HDCP status:
with HDCP,
X6@ = Input HDCP authorized:
ASCII Command
(host to unit)
E }
E1*1HDCP
E }
E1*0HDCP
E }
E1HDCP
E }
I1HDCP
E }
O2HDCP
E X1% }
CONT
E }
+CONT
E }
-CONT
E }
CONT
= no sink or source device detected, 1 = sink or source device detected
0
= Sink or source device detected with no HDCP present
2
= disabled,
0
Response
(unit to host)
]
HdcpE1*1
]
HdcpE1*0
X6@]
With tagged responses
(verbose modes 2 and 3):
X6@]
HdcpE1*
X4$]
With tagged responses
(verbose modes 2 and 3):
X4$]
HdcpI1*
X4$]
With tagged responses
(verbose modes 2 and 3):
X4$]
HdcpO2*
X1%]
Cont1*
X1%]
Cont1*
X1%]
Cont1*
X1%]
With tagged responses
(verbose modes 2 and 3):
X1%]
Cont1*
- (default =
0 127
= enabled (default)
1
MediaPort 200 • Remote Configuration and Control
Additional Description
Enable HDCP encryption
support for the HDMI input
(default).
Disable HDCP encryption
support for the input.
View HDCP authorized
X6@
status for the input.
X4$
View HDCP status for
the input.
X4$
View HDCP status for
the output.
Set the contrast level to
X1%
for the input.
Increase the contrast level
by 1.
Decrease the contrast level
by 1.
View the current contrast
level for the input.
)
64
123