Extron electronics MediaPort 200 User Manual page 133

Command
Auto Memories
Enable
Disable
View setting
Input Presets
NOTE: Contrast, Brightness, H Start, V Start, H Image Position, and V Image position are all saved in User Image
Presets.
Recall preset
Save preset
Delete or clear preset
View preset availability
Input Preset Name
Write name
Read name
NOTE: Empty preset slots are shown as
X1$
space character for
NOTES:
X1) = Enable or disable Auto-Memory:
X1$ = Preset name, up to 16 characters, default is
X2^ = Input preset number:
ASCII Command
(host to unit)
E }
1*1AMEM
E }
1*0AMEM
E }
1AMEM
X2^
2* .
X2^
2* ,
E X2^ }
X2* PRST
51#
E X2^ X1$ }
2* , PNAM
E X2^ }
2* PNAM
[UNASSIGNED]
. These entries are valid for only previously saved presets.
- . response is 3 digits padded with a zero.
1 16
Response
(unit to host)
]
Amem1*1
]
Amem1*0
X1)]
With tagged responses
(verbose modes 2 and 3):
X1)]
Amem1*
X2^]
2Rpr
X2^]
2Spr
X2^]
PrstX2*
]
[16digits]
With tagged responses
(verbose modes 2 and 3):
]
PreI[16digits]
X2^ X1$]
Pnam2* ,
X1$]
With tagged responses
(verbose modes 2 and 3):
X2^ X1$]
Pnam2* ,
. To restore a default input preset name, enter a single
= off or disable, = on or enable (default)
0 1
Preset nnn
MediaPort 200 • Remote Configuration and Control
Additional Description
Set the name of the input
X2^ X1$
preset to .
X1$
View name of the input
X2^
preset .
126