Mix Tab - Extron electronics MediaPort 200 User Manual

Mix Tab

Program Mix Panel
1
From Far End Panel
2
Near End Panel
3
Figure 60.
Program Mix Panel — Contains level and mute control for
1
Line In
to local sound reinforcement and the far end. Faders or text fields can be used to set
proper mix level.
this panel is then sent to the
to Far End
From Far End Panel — Contains level and mute control for the
2
signal from the far end for up to 100 dB of attenuation or up to 12 dB of gain to be sent
to local sound reinforcement. The fader or text field can be used to set proper mix level.
A
Mute
Near End Panel— Contains controls to attenuate or mute the near end room volume
3
which acts as a master attenuation for
Communications
to the
button is available for the channel. Line output signal can be configured as stereo or
dual mono.
Mix to Far End Panel — The
4
the microphone audio being sent to the far end while the
attenuation and mute control for the mix of
audio being sent to the far end. The faders or text fields can be used to set desired
attenuation. A
as stereo or dual mono.
Mix USB Communications Checkbox —When this box is checked (default), USB
5
communications audio is routed to the rear panel analog Line output and Ref output. If
unchecked, USB communications is only routed to the Ref output.
NOTE: If using an external DSP with AEC, this box should be unchecked so that USB
communications audio is only sent to the Ref output.
Mix Tab
audio signal for up to 100 dB of attenuation or up to 12 dB of gain to be sent
buttons are also available for each channel. The mix created in
Mute
Near End
panel.
button is available for the channel.
(if
Mix USB Communications
tab. The fader or text field can be used to set desired attenuation. A
Output
Mic
button is available for both channels. This audio can be configured
Mute
MediaPort 200 • Product Configuration Software (PCS)
Mix to Far End Panel
4
Mix USB Communications Checkbox
5
Mix USB Playback Checkbox
6
USB Playback
panel as well as to the
Program
, ,
USB Playback HDMI Line In
is selected) signals before being sent
fader provides attenuation and mute control for
Program
,
USB Playback HDMI
, , and
HDMI
fader of the
Mix
USB Communications
and
USB
Mute
fader provides
, and
Line In
56