Starting The Pcs Software - Extron electronics MediaPort 200 User Manual

Starting the PCS Software

1.
2.
TIP: If the MediaPort 200 does not have a user defined name (see
3.
If the MediaPort does not appear in the
figure 32
To run the PCS configuration program, do either of the following:
Double-click on the
• EAF.exe
[or
c:\Program Files
Access the program from the
•
a. Click on the computer screen.
Start
b. Select
All Programs
c. From the
All Programs
d. From the
Extron Electronics
Product Configuration Software
e. From the folder submenu, select
The
Extron Product Configuration Software
On the PCS main window, locate the desired MediaPort in the
panel and click its name to select it (see figure 32
Settings Tab on page 59 for information on naming the MediaPort), it can
be identified by type of connection (USB or TCP/IP) or by accessing the MAC
address, which is printed on the white label located on the back of the MediaPort.
The default name of the MediaPort in PCS ends with the unit's MAC address.
Figure 32. PCS Software Window with MediaPort 200 Selected
Click the button (see figure 32
Connect
MediaPort 200 opens.
above). The
3 TCP/IP
file, located on the computer at
Program Files(x86)]\Extron\Extron PCS.
menu on the computer as follows:
Start
from the menu.
Start
menu, select
Extron Electronics
drop-down submenu, select the
folder.
Extron Product Configuration Software
below).
1
above). The main window for the
2
Device Discovery
login panel opens.
MediaPort 200 • Product Configuration Software (PCS)
.
Extron
window opens.
Device Discovery
General
, click the button (see
TCP/IP
.
36