Extron electronics MediaPort 200 User Manual page 46

To update firmware via PCS:
1. Connect the MediaPort 200 to the host PC via the LAN port (see
page 21).
NOTE: Firmware updates are not possible via the front panel USB Config port.
2. From the PCS main window for MediaPort 200 (see
the drop down triangle from the MediaPort 200 (see figure 37
3. From the drop-down list, select
( ).
Device 3
4. Click .
Continue
Figure 37. Accessing Update Firmware
5. From the
Update Firmware to This Device
Open Firmware File...
file (default location is
Program Files (x86) > Extron > Firmware > MediaPort
6. Select .
Open
7. Select ( ) to update the firmware. The front panel LCD on the MediaPort 200
Update 5
reads
Firmware Update Verify File
Firmware Update Installing
Figure 38. Update Firmware to This Device Dialog Box
The MediaPort front panel LCD reads
figure 34
(
2
Update Firmware
dialog box, click
(see figure 38 below) and browse the disk for the firmware
4
with a completion percentage. Followed by
with a completion percentage.
Firmware Update Complete
MediaPort 200 • Product Configuration Software (PCS)
LAN Port on
on page 37), select
below).
1
) then
Update Firmware to this
and reboots.
).
39