Extron electronics MediaPort 200 User Manual page 142

Command
Set date and time
View date and time
View GMT offset
NOTE: Use the read available time zones command (
X7@
variable ( ) to enter for current location with the set time zone command (
List available time zones
Set time zone
View time zone
Set DHCP to on
Set DHCP to off
View DHCP
NOTES:
X1) =
On or off (enable or disable): 0 = Off or disable, 1 = On or enable
X7) =
Local date and time. Set format: MM/DD/YY‑HH:MM:SS
View format: Www {day of the week}, DD Mmm YYYY HH:MM:SS
X7! = Greenwich Mean Time (GMT) offset value (-12:00 through 14:00) in hours and minutes
(hh:mm)
X7@ = A 2- to 6-digit code, such as "PST" for GMT - 8.00
X7# =
UTC offset and location name, such as (UTC‑08:00) Pacific Time for PST
ASCII Command
(host to unit)
E X7) }
CT
E }
CT
E }
CZ
E }
*TZON
E X7@ }
*TZON
E }
TZON
E }
1DH
E }
0DH
E }
DH
Response
(unit to host)
• X7)]
Ipt
X7)]
X7!]
With tagged responses
(verbose modes 2 and 3):
X7!]
Ipz
E }
) to determine and select the time zone
*TZON
E
X7@ X7# ]
<Multiple * >
X7@ X7#]
Tzon *
X7@]
]
Idh1
]
Idh0
X1)]
With tagged responses
(verbose modes 2 and 3):
X1)]
Idh
MediaPort 200 • Remote Configuration and Control
Additional Description
Set local date and time
X7)
.
View local date and time
X7)
.
View Greenwich Mean
Time (GMT) offset value
X7!
for the MediaPort
location. GMT offset
( through )
-12.00 +14.00
represents the time
difference in hours and
minutes ( relative
± hh:mm
to Greenwich, England).
The plus sign and leading
zero are optional.
X7!
is in the format
hh:mm
Example: or
5:30 5.30 =
.
+05:30
}
).
TZON
The MediaPort returns a list
of installed time zones.
Enable Dynamic Host
Configuration Protocol
(DHCP) to enable
automatic assigning of IP
addresses.
Disable DHCP automatic
IP address assignment.
135
.