Command And Response Table For Sis Commands; Input Configuration - Extron electronics MediaPort 200 User Manual

Command and Response Table for SIS Commands

Command

Input Configuration

HDMI Input EDID
Assign EDID to the
input
View assigned EDID
data
Save the HDMI loop
output EDID
Export EDID file
Import EDID file
Auto-Image
Execute
Execute and Fill
Execute and Follow
NOTES:
= EDID emulation. Response is two digits with a leading zero.
X2)
1 = HDMI loop output (valid for EDID save and export only), 201 = Custom output rate 1,
202 = Custom output rate 2,
X3% = String: filename
ASCII Command
(host to unit)
E X2) }
A1* EDID
E }
A1EDID
E X2) }
S2* EDID
E X2) X3% }
E , EDID
E X2) X3% }
I , EDID
A
1*A
2*A
203
Response
(unit to host)
X2)]
EdidA1*
X2)]
With tagged responses
(verbose modes 2 and 3):
X2)]
EdidA1*
X2)]
EdidS2*
X2)]
EdidE
X2)]
EdidI
]
Img0
]
Img1
]
Img2
= Custom output rate 3
MediaPort 200 • Remote Configuration and Control
Additional Description
Assign EDID resolution
X2)
and refresh rate to the
MediaPort 200 input.
View assigned EDID
resolution and refresh rate
X2)
to the MediaPort 200
input.
Save HDMI loop output
EDID to EDID emulation
X2)
(valid for custom
X2)
EDIDs only: = 201,
202, and 203).
X2)
Export EDID to
X3%
.
filename
X2)
Import EDID from
filename (valid for
custom EDIDs only).
Perform an Auto-Image on
the current input (follows
current aspect ratio
setting).
Perform an Auto-Image
and fill the entire display
screen.
Perform an Auto-Image
and follow the input aspect
ratio.
122