Menus On The Lcd Screen; Menu System Overview - Extron electronics MediaPort 200 User Manual

Figure 65 below shows the order in which the screens appear at power-up and during the
default cycle.
Figure 65.

Menus on the LCD Screen

The MediaPort 200 menus that are displayed on the LCD screen enable configuration and
operation of the product without the PCS software or SIS commands. The menu navigation
buttons (
to cycle through the available menus and submenus, and use the horizontal and vertical
Adjust

Menu System Overview

The menu system consists of eight menus, each of which have submenus that enable
desired adjustments to be made (see the
Using the Menus
1.
2.
Power
On
30 sec.
Extron
MediaPort 200
70 sec.
60-1488-01
FW v1.00
2 sec.
Video In: HDMI
1280x720@60Hz
USB Audio Send
No Signal
Power-up and Default Cycle Screens Example
and ) are located to the right of the LCD screen. Press these buttons
Menu Next
knobs to select items.
To access the menu system, press the
( ) is displayed on the LCD screen.
Quick Setup
Select other menus by repeatedly pressing the
displayed.
USB Video Send
None
2 sec.
USB Audio Return
None
2 sec.
Menu Flow Diagram
button on the front panel. The first menu
Menu
button until the desired menu is
Menu
MediaPort 200 • Front Panel Operation
on the next page).
63