Firmware Updates; Downloading The Hae 100 Firmware; Updating The Firmware; Downloading And Installing The Firmware Loader Software - Extron electronics HAE 100 User Manual

Firmware Updates

This section provides information on:
z z
z z

Downloading the HAE 100 Firmware

Use the following procedure to download the latest HAE 100 firmware.
1.
2.
3.
4.
5.

Updating the Firmware

Extron periodically updates product firmware. When updating any Extron product to the
latest firmware, be sure to read the supplied release notes, or contact an Extron Application
Engineer to determine if an Extron product requires a firmware update.
The following sections detail how to download and install firmware for the HAE 100.

Downloading and Installing the Firmware Loader Software

Extron recommends using the latest version of the Firmware Loader software to update the
firmware on the HAE 100. If necessary, use the following procedure to download and install
the Firmware Loader software.
1.
2.
3.
Downloading the HAE 100 Firmware
Updating the Firmware
Go to www.extron.com/download.
On the Download Center screen, click the
Find the HAE 100 firmware download from the alphabetical list.
TIP: Clicking on the H in the alphabetical menu bar brings up all of the firmware
downloads that start with "H" and should assist with finding the HAE 100
firmware download link.
Click the Download link for the HAE 100 firmware and follow the instructions that
appear on the screen.
The file is saved onto the computer. Note the folder where the firmware file is saved.
Go to www.extron.com/download.
On the Download Center screen, click the
On the next Download Center screen, locate and click the
Firmware Loader software (see figure 6).
Figure 6. Firmware Loader Download Link
link on the left sidebar menu.
Firmware
Software link on the left sidebar menu.
HAE 100 HDMI Audio Extractor • Firmware Updates
link for the
Download
14