Updating Firmware - Extron electronics mediaport 200 User Manual

Updating firmware

The current firmware version number is displayed in the
figure 50, , on the previous page) of the
3
1. Click the button (
Update
2. In the dialog box, click the
firmware file on your computer (by default the file is stored at
C:\Program Files (x86)\Extron\Firmware\MediaPort
file name in the
Firmware
Figure 52. Firmware Update Dialog Box
3. Click to begin. During the updating process, a message window appears
Update
in the middle of the screen, showing the progress of the update:
Installing the Firmware
Figure 53. Firmware Update Message Window
When the update is completed, the message window closes and the message
Firmware Upload Complete
In the LCD window,
When the update is complete, the window shows the current firmware version
briefly and then returns to the default cycle.
Passwords — From this panel you can set and remove administrator and user
E
passwords.
NOTES:
• An administrator password must be in place before a user password can be
assigned.
• Passwords must contain 4 to 12 alphanumeric characters. Symbols and
spaces are not allowed, and the passwords are case sensitive.
Device
). The
2
Firmware Update
button to locate the
Browse
field (see figure 52).
, and
Rebooting Device
appears near the top of the screen.
is displayed while the unit is rebooting.
Extron MediaPort 200
MediaPort 200 • Remote Configuration and Control
field (see
Firmware Version
Info panel.
dialog box opens.
) or enter the firmware
Initializing
.
,
82