Extron electronics MediaPort 200 User Manual page 140

Command
IP system reset
NOTE: This reset returns only IP settings such as IP address, subnet mask, gateway address, DHCP setting,
and port mapping (Telnet, Web, and direct access) to factory values.
Information Requests
General information
Query model name
Query unit description
Query system memory
usage
Query user memory
usage
USB information
NOTES:
=
X# Input video format: 0 = No input signal detected, 1 = DVI, 2 = HDMI
=
X1) On or off (enable or disable): 0 = Off or disable, 1 = On or enable
= Horizontal and vertical frequencies. Format is 4 digits with a single decimal place and
X1#
leading zeros. (Example: 0075.3)
=
X4@ Video mute: 0 = Off (unmute) (default), 1 = On (mute to black screen), 2 = On (mute output
sync and video)
=
X5( USB audio type: 0 = None, 1 = LPCM 2-Ch
=
X6) USB standard: 0 = None, no host, 1 = USB 1.1, 2 = USB 2.0, 3 = USB 3.0
ASCII Command
(host to unit)
E }
1ZQQQ
I
1I
2I
3I
4I
35I
Response
(unit to host)
]
Zpq1
X#• X4@ • X1#•
Typ Blk Hrt
With tagged responses (verbose modes 2 and 3):
X#• X4@•
Inf*Typ Blk Hrt
]
MediaPort 200
HDMI and Audio to USB Scaling Bridge
With tagged responses (verbose modes 2 and 3):
Inf02*HDMI and Audio to USB Scaling
]
Bridge
{Bytes used out of total Kbytes}
{Bytes used out of total Kbytes}
X1) • X1)•
Host VSend CommOut
X5( •
pcPlaybackIn USBStd
With tagged responses (verbose modes 2 and 3):
X1)• X1)•
Inf35*Host VSend
X5( •
CommIn pcPlaybackIn
MediaPort 200 • Remote Configuration and Control
Additional Description
Reset only IP settings to
factory defaults.
X1#]
Vrt
X1#• X1#]
Vrt
View video input
signal type (Typ),
video mute status
(Blk), and horizontal
(Hrt) and vertical
(Vrt) frequencies.
View the product name.
]
...
]
]
X5( • X5( •
CommIn
X6)]
X5( •
...
CommOut
X5( • X6)]
USBStd
133