Extron electronics MediaPort 200 User Manual page 141

Command
Query firmware version
Query firmware build
version
Query part number
View internal
temperature
IP Setup Commands
Set unit name (doubles
as TCP/IP hostname)
Set unit name to factory
default
View unit name
Set verbose mode
View verbose mode
NOTES:
X1@ = Internal temperature (in degrees Celsius): Response is two digits, padded with a zero.
X3! = Verbose Mode: 0-3 (see
X3@ = Unit name: Text string of up to 63 characters (
•
•
•
X3# = Default name — MediaPort‑200‑xx‑xx‑xx.
The factory default name is a combination of the model name and the last three character
pairs of the MAC address.
ASCII Command
(host to unit)
Q
*Q
N
E }
20STAT
E X3@ }
CN
E • }
CN
E }
CN
E X3! }
CV
E }
CV
Verbose Mode
The first character must be a letter.
The last character cannot be a hyphen. No blank or space characters are permitted as
part of the name.
No distinction is made between uppercase and lowercase letters.
Response
(unit to host)
]
n.nn
With tagged responses
(verbose modes 2 and 3):
]
Ver01*n.nn
]
n.nn.nnnn
With tagged responses
(verbose modes 2 and 3):
]
Bldn.nn.nnnn
]
60-1488-01
With tagged responses
(verbose modes 2 and 3):
]
Pno 60-1488-01
X1@]
With tagged responses
(verbose modes 2 and 3):
• X1@]
20Stat
• X3@]
Ipn
• X3#]
Ipn
X3@]
With tagged responses
(verbose modes 2 and 3):
• X3@]
Ipn
X3!]
Vrb
X3!]
With tagged responses
(verbose modes 2 and 3):
X3!]
Vrb
on page 118 for more information).
, , and the hyphen (
A-Z 0-9
MediaPort 200 • Remote Configuration and Control
Additional Description
View firmware version to
the second decimal place.
View firmware version (to
the second decimal place)
and the build (to the fourth
decimal).
View the unit part number.
View unit internal
X1@
temperature in
degrees Celsius.
Specify a name for the unit.
Reset the unit name to the
X3#
factory default name .
View the name of the unit.
Set the verbose mode and
X3!
tagged responses .
View the current verbose
mode and tagged
responses status.
) are permitted.
-
134