Command
USB Name
Set USB name
Set USB name to
factory default
View USB name
Reset
Reset to factory
defaults
24
NOTE: Receive timeouts are reset to defaults and port redirects are terminated. This reset excludes IP
settings such as IP address, subnet mask, gateway address, and the IP security-level table. It does not
remove the file system.
Erase all files from flash
memory
NOTE: This reset only removes files created in the user space, which includes those created by the backup
and restore functions, software configuration tools, image captures, user logo files, and other user-supplied
HTML files. Space used by firmware for internal operations such as saving non-volatile settings is not
removed.
Absolute reset, retaining
IP settings
NOTE: This reset removes all device settings, including the file system and passwords, but retains IP settings
such as IP address, subnet mask, gateway address, DHCP setting, and port mapping (Telnet, Web, and
direct access) in order to preserve communication with the device. This reset is recommended after a
firmware update.
Reboot system
24
Restart network
24
Absolute system reset
NOTE:
X4(
=
USB name: up to 32 characters. Upper- and lowercase alphanumeric characters allowed,
including
ASCII Command
(host to unit)
E
X4(
}
D1*
UNAM
E
•
}
D1*
UNAM
E
}
D1UNAM
E
}
ZXXX
E
}
ZFFF
E
}
ZY
E
}
1BOOT
E
}
2BOOT
E
}
ZQQQ
and spaces.
_ \
Response
(unit to host)
X4(]
UnamD1*
UnamD1* Extron
]
MediaPort 200
X4(]
]
Zpx
]
Zpf
]
Zpy
]
Boot1
]
Boot2
]
Zpq
MediaPort 200 • Remote Configuration and Control
Additional Description
Sets the USB device name
of the MediaPort 200.
Resets the USB
device name of the
MediaPort 200.
View the MediaPort 200
USB device name.
Reset all device settings to
factory default settings.
Erase all files from flash
(user) memory.
Reset all device settings to
factory defaults but retain
IP settings.
Reboot the unit.
Restart network
connections.
Reset all device settings
to the factory defaults,
retaining the firmware
version.
132
Need help?
Do you have a question about the MediaPort 200 and is the answer not in the manual?
Questions and answers