Modifying Grid Test Pattern Characteristics; Changing The Test Pattern Frequency; Enabling A Light Engine Test Pattern; Viewing Projector Status - Christie Boxer 4K30 User Manual

9. To change the level of the ramp test pattern, select Test Pattern Ramp Level and adjust the
slider to the value you want.
10. To confirm your selection, select Enter.

Modifying grid test pattern characteristics

1. Select MENU > System Settings > Diagnostics.
2. Select Test Pattern.
3. Select one of the grid test patterns: SQUARE GRID or DIAGONAL GRID.
4. Select Enter.
5. To change the pitch of the grid test pattern, select Test Pattern Grid Pitch and adjust the
slider to the value you want.
6. To confirm your selection, select Enter.
7. To change the color of the grid, select Test Pattern Grid Color and select Enter.
8. To enable movement of the test pattern, select Test Pattern Grid Motion and select Enter.

Changing the test pattern frequency

Test patterns are displayed with a 60 Hz frequency (60 frames/second). For diagnostic purposes,
you can change the frame rate.
1. Select MENU > System Settings > Diagnostics > Test Pattern Frequency.
2. Select the appropriate frequency:
• Bit Sequence
• 3D
• Other Image Artifacts
3. Select Enter.

Enabling a light engine test pattern

Enable a light engine test pattern to assist with diagnosing any issues that may occur with the light
engine.
1. Select MENU > System Settings > Diagnostics > Engine Test Pattern.
2. Scroll through the list of light engine test patterns.
3. Select the appropriate test pattern and select Enter.

Viewing projector status

Alarms contain information about the values of the items operating in normal range, warnings, and
errors that can be reported by the status system of the projector.
Boxer 4K30 User Manual
020-101777-01 Rev. 1 (03-2015)
Diagnostic Tools
30