The Pocket Table Tool_P .Tch - HEIDENHAIN TNC 320 User Manual

Compact contouring control

Hide thumbs Also See for TNC 320:

Table of Contents

The pocket table TOOL_P .TCH

The function of the pocket table depends on the

machine. Refer to your machine manual.

In the pocket table TOOL_P .TCH (permanently saved under

TNC:\table\) you specify which tools your tool magazine contains.

To enter data in the pocket table TOOL_P .TCH, proceed as follows:

Display the tool table: The TNC shows the tool

Display the pocket table: The TNC shows the

pocket table

Edit the pocket table: Set the EDIT soft key to ON

With the upward or downward arrow keys you can

select the pocket number that you want to edit

With the rightward or leftward arrow keys you can

select the data that you want to edit

To leave the pocket table, press the END key

Further information on this topic

Operating modes of the TNC

Further Information:

Working with the pocket table

Further Information:

HEIDENHAIN | TNC 320 | Conversational Programming User's Manual | 9/2016

"Modes of operation", page 77

"Pocket table for tool changer",

Setting up tools