HEIDENHAIN TNC 320 User Manual page 293

Compact contouring control

Hide thumbs Also See for TNC 320:

Table of Contents

Element information

In the Element Information window, the TNC displays the

coordinates of the machining position that you last selected in the

List View window or Graphics window by clicking on the mouse.

You can also use the mouse to change the graphic display. The

following functions are available:

In order to rotate the model shown in three dimensions: Hold

down the right mouse button down and move the mouse

To shift the model shown: Hold the center mouse button or the

wheel button down and move the mouse.

To zoom in on a certain area: Mark a zoom area by holding

the left mouse button down. After you release the left mouse

button, the TNC zooms in on the defined area

To rapidly magnify and reduce any area: Rotate the mouse

wheel backwards or forwards

To return to the standard display: Press the shift key and

simultaneously double-click with the right mouse key. The

rotation angle is maintained if you only double-click with the

right mouse key

HEIDENHAIN | TNC 320 | Conversational Programming User's Manual | 9/2016

DXF converter (option 42)