HEIDENHAIN TNC 320 User Manual page 419

Compact contouring control

Hide thumbs Also See for TNC 320:

Table of Contents

Deactivating FUNCTION PARAXCOMP

After the TNC is started up, the standard configuration

is always effective.

The parallel-axis function PARAXCOMP is automatically

reset by the TNC with the following functions:

Selection of a program

PARAXCOMP OFF

You must deactivate the parallel-axis functions before

switching the machine kinematics.

Use the PARAXCOMP OFF function to switch off the parallel-axis

functions PARAXCOMP DISPLAY and PARAXCOMP MOVE. Proceed as

follows for the definition:

Show the soft-key row with special functions

Select the menu for defining various plain-language

Select FUNCTION PARAX

Select FUNCTION PARAXCOMP

Select FUNCTION PARAXCOMP OFF. If you want

to switch off the parallel-axis functions only for

individual parallel axes, then the respective axis

must be specifically indicated.

HEIDENHAIN | TNC 320 | Conversational Programming User's Manual | 9/2016

Working with the parallel axes U, V and W 11.3

13 FUNCTION PARAXCOMP OFF

13 FUNCTION PARAXCOMP OFF W