HEIDENHAIN TNC 320 User Manual page 98

2
Introduction
2.5 Window manager
Restore data
Caution: Data may be lost!
The control overwrites existing files without a
confirmation prompt.
To restore the data proceed as follows:
Select NC/PLC Restore
Select the archive to be restored
Select the next step with the FORWARD soft key
The control generates a list of files for restoring.
Check the list. Deselect files if necessary.
Select the next step with the FORWARD soft key
Stop the control if required with the STOP NC SOFTWARE soft
key
Extract the archive
The control restores the files.
Confirm with the OK soft key
The control restarts the NC software.
98
HEIDENHAIN | TNC 320 | Conversational Programming User's Manual | 9/2016