Programming The First Part; Selecting The Correct Operating Mode; The Most Important Tnc Keys - HEIDENHAIN TNC 320 User Manual

1.3

Programming the first part

Selecting the correct operating mode

You can write programs only in Programming mode:
Press the Programming operating mode key for
the TNC to switch to Programming
Further information on this topic
Operating modes
Further Information:

The most important TNC keys

Key Functions for conversational guidance
Confirm entry and activate the next dialog
prompt
Ignore the dialog question
NO
ENT
End the dialog immediately
Abort dialog, discard entries
Soft keys on the screen with which you select
functions appropriate to the active operating
state
Further information on this topic
Writing and editing programs
Further Information:
Overview of keys
Further Information:
HEIDENHAIN | TNC 320 | Conversational Programming User's Manual | 9/2016
"Programming", page 78
"Editing a program", page 124
"Controls of the TNC", page 2
Programming the first part
1
1.3
55