HEIDENHAIN TNC 320 User Manual page 600

16
MOD Functions
16.11 Ethernet interface
Network settings specific to the device
Press the DEFINE NETWORK CONNECTN. soft key to enter
the network settings for a specific device. You can define any
number of network settings, but you can manage only seven at
one time
Setting
Network drive
Status log
600
Meaning
List of all connected network drives. The
TNC shows the respective status of the
network connections in the columns:
Mount: Network drive connected / not
connected
Auto: Network drive is to be
connected automatically/manually
Type: Type of network connection. cifs
and nfs are possible
Drive: Designation of the drive on the
TNC
ID: Internal ID that identifies if a mount
point has been used for more than one
connection
Server: Name of the server
Share: Name of the directory on the
server that the TNC is to access
User: User name with which the user
logs on to the network
Password: Network password
protected or not
Query password?: Query / do not
query password during connection
Options: Display additional connection
options
To manage the network drives, use the
screen buttons.
To add network drives, use the Add
button: The TNC then starts the
connection wizard, which guides you by
dialog through the required definitions.
Display of status information and error
messages.
Press the Clear button to delete the
contents of the Status Log window.
HEIDENHAIN | TNC 320 | Conversational Programming User's Manual | 9/2016