HEIDENHAIN TNC 320 User Manual page 348

9
Programming Q parameters
9.8 Additional functions
FN 29: PLC – Transfer values to the PLC
This function may only be used with the permission
of your machine tool builder.
The FN 29: PLC function transfers up to eight numerical values or
Q parameters to the PLC.
FN 37: EXPORT
This function may only be used with the permission
of your machine tool builder.
You need the FN 37: EXPORT function if you want to create your
own cycles and integrate them in the TNC.
FN 38: SEND – Send information from NC program
The function FN 38: SEND enables you to write texts and Q
parameter values to the log from the NC program and send to a
DNC application.
Data transmission is through a standard TCP/IP computer network.
For more detailed information, consult the Remo
Tools SDK manual.
Example
Document values from Q1 and Q23 in the log.
FN 38: SEND /"Q PARAMETER Q1: %F Q23: %F" / +Q1 / +Q23
348
HEIDENHAIN | TNC 320 | Conversational Programming User's Manual | 9/2016