HEIDENHAIN TNC 320 User Manual page 368

9
Programming Q parameters
9.11 String parameters
Reading system data
With the function SYSSTR you can read system data and store
them in string parameters. You select the system data through a
group number (ID) and a number.
Entering IDX and DAT is not required.
Group name, ID no.
Program information, 10010
Channel data, 10025
Values programmed in the tool
call, 10060
Touch-probe data, 10350
NC software version, 10630
Tool data, 10950
368
Number Meaning
1 Path of the current main program
Path of the cycle selected with CYCL DEF 12 PGM
3
CALL
Path of the program selected with SEL PGM
10
1 Channel name
1 Tool name
50 Probe type of the active touch probe TS
70 Probe type of the active touch probe TT
73 Key name of the active touch probe TT from MP
activeTT
2 Path of the selected pallet table
10 Version identifier of the NC software version
1 Tool name
2 DOC entry of the tool
3 AFC control setting
4 Tool-carrier kinematics
HEIDENHAIN | TNC 320 | Conversational Programming User's Manual | 9/2016