HEIDENHAIN TNC 320 User Manual page 539

Compact contouring control

Hide thumbs Also See for TNC 320:

Table of Contents

Programming and executing simple machining operations 14.1

Positioning with manual data input (MDI)

Switch to the Positioning with manl.data input

mode of operation

Program the desired available function

Press the NC START key

The control executes the highlighted NC block.

Further Information:

simple machining operations", page 538

The following functions are not available in the

Positioning with manl.data input operating mode:

FK free contour programming

Program call

CALL SELECTED PGM

Programming graphics

Program-run graphics

Using the SELECT BLOCK and CUT OUT BLOCK soft

keys etc. you can also conveniently and rapidly reuse

program sections from other NC programs.

Further Information:

inserting program sections", page 127

You can control and modify Q parameters with the

soft keys Q PARAMETER LIST and Q INFO.

Further Information:

parameters", page 326

HEIDENHAIN | TNC 320 | Conversational Programming User's Manual | 9/2016

"Programming and executing

"Marking, copying, cutting and

"Checking and changing Q