HEIDENHAIN TNC 320 User Manual page 665

Functions of the TNC 320 and the iTNC 530 compared
Comparison: Differences in MDI operation
Function
Execution of connected
sequences
Saving modally effective functions
Miscellaneous functions
Comparison: Differences in programming station
Function
Demo version
Demo version
Copying NC programs
Shifting the horizontal soft-key row
HEIDENHAIN | TNC 320 | Conversational Programming User's Manual | 9/2016
TNC 320
Function available
Function available
Status display for Q parameters
Block functions, e.g. COPY
BLOCK
Miscellaneous program
functions, e.g. FUNCTION
DWELL
TNC 320
Programs with more than 100 NC
blocks cannot be selected, an error
message is issued
If nesting with PGM CALL results
in more than 100 NC blocks, there
is no test graphic display; an error
message is not issued
Copying to and from the directory
TNC:\ is possible with Windows
Explorer
Clicking on the soft-key bar shifts
one soft-key row to the right or left
iTNC 530
Function available
Function available
Global program settings
iTNC 530
Programs can be selected, max.
100 NC blocks are displayed,
further blocks are truncated in the
display
Nested programs can be
simulated
TNCremo or file manager of
programming station must be
used for copying
Clicking any soft-key bar activates
the respective soft-key row
17
17.5
665