HEIDENHAIN TNC 320 User Manual page 291

Compact contouring control

Hide thumbs Also See for TNC 320:

Table of Contents

DXF converter (option 42)

Rapid selection of hole positions via icon

Select the mode for choosing a machining

position: The Graphics window is active for

position selection

Select the icon: The TNC opens a window in

which you can filter the holes by size

Configure the filter settings if required and click

the OK button to confirm: The TNC loads the

selected positions into the List View window

(displays a point symbol).

Further Information:

"Filter settings", page 292

If necessary you can also deselect elements that

you already selected by clicking the element in the

graphic window again, but this time while pressing

the CTRL key. Alternatively, select the element

in the List View window and press DEL. You can

deselect all selected elements by clicking the icon

Save the selected machining positions to the

clipboard of the TNC so that you can then insert

them as a positioning block with cycle call in a

plain-language program, or

To save the selected machining positions in a point

file: The TNC displays a pop-up window for you

to enter any file name, the file type and target

Confirm the entry: The TNC saves the contour

program to the selected directory

If you want to select more machining positions,

press the Cancel Selected Elements icon and

select as described above

HEIDENHAIN | TNC 320 | Conversational Programming User's Manual | 9/2016