HEIDENHAIN TNC 320 User Manual page 159

4.2 Adding comments
Application
You can add comments to a part program to explain program steps
or make general notes.
Depending on the machine parameter lineBreak
(no. 105404), the TNC displays comments that can
no longer be shown entirely on the screen, shows
these in several lines or the character >> appears on
the screen.
The last character in a comment block must not have
any tilde(~).
Entering a comment in a separate block
Select the block after which the comment is to be inserted
Initiate the programming dialog with the semicolon key (;) on
the alphabetic keyboard
Enter your comment and conclude the block by pressing the
END key
Functions for editing of the comment
Soft key Function
Jump to beginning of comment
Jump to end of comment
Jump to the beginning of a word. Words must
be separated by a space
Jump to the end of a word. Words must be
separated by a space
Switch between paste and overwrite mode
HEIDENHAIN | TNC 320 | Conversational Programming User's Manual | 9/2016
Adding comments
4
4.2
159