HEIDENHAIN TNC 320 User Manual page 596

16
MOD Functions
16.11 Ethernet interface
General network settings
Press the CONFIGURE NETWORK soft key to enter the general
network settings. The Computer name tab is active:
Setting
Primary
interface
Computer
name
Host file
Select the Interfaces tab to enter the interface settings:
Setting
Interface list
Allow IP
forwarding
596
Meaning
Name of the Ethernet interface to be
integrated in your company network. Only
active if a second, optional Ethernet interface
is available on the control hardware
Name displayed for the TNC in your company
network
Only required for special
Name of a file in which the assignments of IP
addresses to computer names is defined
Meaning
List of the active Ethernet interfaces. Select
one of the listed interfaces (via mouse or
arrow keys)
Activate button: Activate the selected
interface (X appears in the Active column)
Deactivate button: Deactivate the
selected interface (- appears in the Active
column)
Configuration button: Open the
configuration menu
This function must be kept
Only activate this function if external access
via the second, optional Ethernet interface
of the TNC is necessary for diagnostic
purposes. Only do so after instruction by our
Service Department
applications:
deactivated.
HEIDENHAIN | TNC 320 | Conversational Programming User's Manual | 9/2016