HEIDENHAIN TNC 320 User Manual page 125

Compact contouring control

Hide thumbs Also See for TNC 320:

Table of Contents

Soft key/key

Set the selected word to zero

Erase an incorrect number

Delete the (clearable) error message

Delete the selected word

Delete the selected block

Erase cycles and program sections

Insert the block that you last edited or deleted

Inserting blocks at any desired location

Select the block after which you want to insert a new block and

initiate the dialog

Save changes

The control normally saves changes automatically if you switch the

operating mode or if you select the file manager. If you deliberately

want to save changes to the program, proceed as follows:

Select the soft-key row with the saving functions

Press the STORE soft key for the TNC to save all

changes made since the last time you saved the

Saving a program to a new file

You can save the contents of the currently active program under a

different program name. Proceed as follows:

Select the soft-key row with the saving functions

Press the SAVE AS soft key: The TNC opens a

window in which you can enter the directory and

the new file name

Select the target directory if required with the

SWITCH soft key

Enter the file name

Confirm with the OK soft key or the ENT key, or

press the CANCEL soft key to abort

The file saved with SAVE AS is now also found in the

file management under LAST FILES.

HEIDENHAIN | TNC 320 | Conversational Programming User's Manual | 9/2016

Opening programs and entering