17
Tables and Overviews
17.3
Technical Information
User functions
Programming aids
Teach-In
Test graphics
Display modes
Programming graphics
Program-run graphics
Display modes
Machining time
Contour, returning to
Datum tables
Touch probe cycles
630
■
tan α, arc sin, arc cos, arc tan, a
number, constant π, negation, truncation of digits before or after the
decimal point
■
Functions for calculation of circles
■
String parameters
■
Calculator
■
Complete list of all current error messages
■
Context-sensitive help function for error messages
■
Graphic support for the programming of cycles
■
Comment blocks in NC program
■
Actual positions can be transferred directly to the NC program
■
Graphical simulation before a program run, also while another program
is being run
■
Plan view / projection in 3 planes / 3-D view / 3-D line graphic
■
Detail enlargement
■
In Programming mode, the contour of the NC blocks is drawn on
screen while they are being entered (2-D pencil-trace graphics), even if
another program is running
■
Graphic simulation of real-time machining in plan view / projection in 3
planes / 3-D view
■
Calculating the machining time in the Test Run operating mode
■
Display of the current machining time in the Program Run operating
modes
■
Block scan in any block in the program, returning the tool to the
calculated nominal position to continue machining
■
Program interruption, contour departure and return
■
Multiple datum tables for storing workpiece-specific datums
■
Calibrating the touch probe
■
Compensation of workpiece misalignment, manual or automatic
■
Datum setting, manual or automatic
■
Automatically measuring workpieces
■
Cycles for automatic tool measurement
HEIDENHAIN | TNC 320 | Conversational Programming User's Manual | 9/2016
n
, e
n
, In, log, absolute value of a