HEIDENHAIN TNC 320 User Manual page 588

16
MOD Functions
16.8 Software numbers
16.8 Software numbers
Application
The following software numbers are displayed on the TNC screen
after the Software version MOD function has been selected:
Control model: Designation of the control (managed by
HEIDENHAIN)
NC SW: Number of the NC software (managed by
HEIDENHAIN)
NCK: Number of the NC software (managed by
HEIDENHAIN)
PLC: Number or name of the PLC software (managed by
your machine manufacturer)
In the FCL Information MOD function, the TNC shows the
following information:
Development level (FCL=Feature Content Level):
Development level of the software installed on the control
Further Information:
functions)", page 9
16.9 Enter the code number
Application
The TNC requires a code number for the following functions:
Function
Select user parameters
Configuring an Ethernet card
Enabling special functions for Q parameter
programming
588
"Feature Content Level (upgrade
Code number
123
NET123
555343
HEIDENHAIN | TNC 320 | Conversational Programming User's Manual | 9/2016