HEIDENHAIN TNC 320 User Manual page 581

16.3 Machine settings
External access
Refer to your machine manual. The machine tool
builder can configure the external access options.
Machine-dependent function: With the TNCOPT soft
key, you can permit or lock access for an external
diagnostics or commissioning program.
With the MOD function External access you can grant or restrict
access to the TNC. If you have restricted the external access it
is no longer possible to connect to the TNC and exchange data
via a network or a serial connection, e.g. with the TNCremo data
transfer software.
Restricting external access:
In the MOD menu select the Machine settings groupMachine
settings
Select the External access menu
Set the EXTERNAL ACCESS ON/OFF soft key to OFF
Press the OK soft key
HEIDENHAIN | TNC 320 | Conversational Programming User's Manual | 9/2016
Machine settings 16.3
16
581