HEIDENHAIN TNC 320 User Manual page 495

Compact contouring control

Hide thumbs Also See for TNC 320:

Table of Contents

Datum management with the preset table 13.4

Editing the preset table

Editing function in table mode

Select the table start

Select the table end

Select the previous page in the table

Select the next page in the table

Select the functions for entering presets

Display the "Basic Transformation/Axis Offset"

Activate the datum of the selected line of the

preset table

Add the entered number of lines to the end of the

table (2nd soft-key row)

Copy the highlighted field (2nd soft-key row)

Insert the copied field (2nd soft-key row)

Reset the selected line: The TNC enters - in all

columns (2nd soft-key row)

Insert a single line at the end of the table (2nd

soft-key row)

Delete a single line at the end of the table (2nd

soft-key row)

HEIDENHAIN | TNC 320 | Conversational Programming User's Manual | 9/2016