HEIDENHAIN TNC 320 User Manual page 620

Compact contouring control

Hide thumbs Also See for TNC 320:

Table of Contents

Tables and Overviews

Machine-specific user parameters

Parameter settings

Behavior of M7 and M8 with cycles 202 and 204

Geometry filter for filtering out linear elements

off: Error message is displayed

TRUE: At the end of cycle 202 and 204 the condition of M7 and M8 is restored before

the cycle call

FALSE: At the end of cycle 202 and 204 the condition of M7 and M8 is not restored

independently

Type of stretch filter

- Off: No filter active

- ShortCut: Leave out single points on polygon

- Average: The geometry filter smooths corners

Maximum distance of filtered to unfiltered contour

0 to 10 [mm]: The filtered out points lie within this tolerance to the

resultantdistance

Maximum length of distance resulting from filtering

0 to 1000 [mm]: Length over which geometry filtering is effective

HEIDENHAIN | TNC 320 | Conversational Programming User's Manual | 9/2016