3 Mounting and Commissioning
Pickup Voltages of
BI21 to BI24
Bus Address
389
Table 3-14
Jumper settings for the pickup voltages of the binary inputs BI21 through BI24
on the B–I/O-1 board
Binary Inputs
BI21
BI22
BI23
BI24
1)
Factory settings for devices with power supply voltages of 24 VDC to 125 VDC
2)
Factory settings for devices with power supply voltages of 220/250 VDC and 115/230 VAC
Jumpers X71, X72 and X73 on the input/output module B-I/O-1 serve to set up the
Bus Address. The jumpers must not be changed. The following table lists the jumper
presettings.
Table 3-15
Jumper Settings Input/Output Board B-I/O-1
Jumper
X71
X72
X73
Jumper
19 VDC Pickup
X21
X22
X23
X24
Housing size
1)
88 VDC Pickup
L
H
L
H
L
H
L
H
1
1
/
and
/
2
1
L
H
L
SIPROTEC 4, 7SJ62/63/64 Handbuch
C53000-G1140-C147-A, Edition 07.2015
2)