Function Keys; Default Display; A.5.4 Function Keys - Siemens siprotec SJ62 User Manual

A.5.4

Function Keys

A.5.5

Default Display

SIPROTEC 4, 7SJ62/63/64 Handbuch
C53000-G1140-C147-A, Edition 07.2015
Table A-10 Further Output Relay Presettings for 7SJ632*-, 7SJ633*-, 7SJ635*- 7SJ636*-
Binary Output Default function
BO10 Relay PICKUP
Table A-11 Further Output Relay Presettings for 7SJ64**-
Binary Output Default function
BO3 Relay TRIP
52Breaker
BO4 52Breaker
79 Close
BO5 52Breaker
79 Close
Table A-12 Further Output Relay Presettings for 7SJ641*-, 7SJ642*- and 7SJ645*-
Binary Output Default function
BO1 GndSwit.
BO2 GndSwit.
BO10 Disc.Swit.
BO11 Disc.Swit.
Table A-13 Applies to All Devices and Ordered Variants
Function Keys Default function
F1 Display of opera-
tional indications
F2 Display of the
primary operational
measured values
F3 An overview of the
last eight network
faults
F4 Not allocated
Devices featuring 4-line display provide a number of predefined measured value
pages. The start page of the default display, which will open after device startup, can
be selected via parameter 640 Start image DD
Devices featuring a graphic display have a default display that provides a graphical
representation of the current operating status and/or selected measured values. The
displayed parameters are selected during configuration.
Function No.
501 Relay PICKUP
Function No.
511 Relay GENERAL TRIP command
52 Breaker
52 Breaker
2851 79 - Close command
52 Breaker
2851 79 - Close command
Function No.
Ground Switch
Ground Switch
Disconnect Switch
Disconnect Switch
Function No.
- -
- -
- -
- -
A.5 Default Settings
Description
Description
Description
Description
632