Table of Contents
Advertisement
Configuration Using the Command Line Interface (CLI)
Basic Settings (CLI)
The Basic Setting group provides you with the ability to configure switch information, IP address, User name/
Password of the system. It also allows you to do firmware upgrade, backup and restore configuration, reload
factory default, and reboot the system.
Optionally, you can use the web user interface for configuration, see
This table provides detailed information about the CLI commands for basic settings.
Switch Setting
System Name
System Location
System Contact
Display
Admin Password
User Name and Password
Display
108 - Basic Settings (CLI)
Switch(config)# hostname
WORD
Network name of this system
Switch(config)# hostname ES7506
Switch(config)#
Switch(config)# snmp-server location Minnesota
Switch(config)# snmp-server contact support@comtrol.com
Switch# show snmp-server name
ES7506
Switch# show snmp-server location
Minnesota
Switch# show snmp-server contact
support@comtrol.com
Switch> show version
ES7506
Loader Version : 1.6.4.4
Firmware Version : 2.1b-20100224-22:06:36
Hardware Version : 1.0
CPLD Version : 1.0
Switch# show hardware mac
MAC Address: 00C04E2D0001
Switch(config)# administrator
NAME
Administrator account name
Switch(config)# administrator admin
PASSWORD
Administrator account password
Switch(config)# administrator admin admin
Change administrator account admin and password admin
success.
Switch# show administrator
Administrator account information
name: admin
password: admin
Basic Settings
on Page 43.
RocketLinx ES7506 User Guide: 2000529 Rev. F
Advertisement
Table of Contents
