Proline Fieldcheck
Block
Group
CONTROL
USER
⇒
INTERFACE
P. 29
Endress+Hauser
9.3
Block USER INTERFACE
Function group
LANGUAGE
⇒
FORMAT TIME
9.3.1
Group CONTROL
LANGUAGE
CONTRAST LCD
BACK LIGHT
FORMAT DATE
DATE
FORMAT TIME
Description of device functions - General section
CONTRAST
BACK LIGHT
LCD
P. 29
P. 29
TIME
P. 29
P. 30
Function description
USER INTERFACE → CONTROL
Use this function to select the language for all texts, parameters and messages shown on
the local display.
Options:
ENGLISH
DEUTSCH
Use this function to optimise display contrast to suit
local operating conditions.
User input:
10...100%
Factory setting:
50%
Options:
ON(AUTOMATIC)
OFF
Factory setting:
ON(AUTOMATIC)
!
Note!
If the ON(AUTOMATIC) setting is selected, the lighting of the display is automatically
switched off if the equipment is not used for 10 minutes.
Use this function to select a date format.
Options:
DD.MM.YYYY
MM/DD/YYYY
Factory setting:
DD.MM.YYYY
Use this function to enter the date.
User input:
DD.MM.YYYY (MM/DD/YYYY)
Options:
24H
12H (AM/PM)
Factory setting:
24H
Function
FORMAT
DATE
P. 29
P. 29
DATE
P. 29
29