Linking A Library To The Codesys Project; Figure 100: "Target Settings" Window (1); Figure 101: "Target Settings" Window (2); Figure 102: "New Pou" Window - WAGO -I/O-SYSTEM 750 User Manual

13.1.5

Linking a Library to the CoDeSys Project

To link the previously created library mytest.lib to CoDeSys, proceed as follows:
1. Click on File in the menu bar and select New.
2. Open the selection field for "Target Settings" and select the I/O-IPC you are
using. In this example, it is the 758-876-111.

Figure 100: "Target Settings" window (1)

3. Click on the [OK] button. The "Target Settings" window opens.
4. Click on the [OK] button in the "Target Settings" window.

Figure 101: "Target Settings" window (2)

5. Click on [OK] in the "New POU" window.

Figure 102: "New POU" window

WAGO I/O-SYSTEM 750
I/O-IPC-C10E, CANopen Master
Incorporation of C-Functions as CoDeSys Library 143