WAGO -I/O-SYSTEM 750 User Manual page 206

206 I/O Modules
750-638, 753-638
In the input and output process image, counter modules occupy 6 bytes of user
data: 4 data bytes and two additional control/status bytes. The module provides
16-bit counter values for every counter. Four words are assigned in the process
image via word alignment.
Input Process Image
Offset
0
1
2
3
Output Process Image
Offset
0
1
2
3
Pulse Width Modules
750-511 (and all variants)
In the input and output process image, pulse width modules occupy 6 bytes of
user data: 4 data bytes and two additional control/status bytes. Four words are
assigned in the process image via word alignment.
Input and Output Process Image
Offset
0
1
2
3
Byte Designation
High Byte Low Byte
- S0
D1 D0
- S1
D3 D2
Byte Designation
High Byte Low Byte
- C0
D1 D0
- C1
D3 D2
Byte Designation
High Byte Low Byte
- C0/S0
D1 D0
- C1/S1
D3 D2
Note
Status byte of counter 1
Counter value of counter 1
Status byte of counter 2
Counter value of counter 2
Note
Control byte of counter 1
Counter setting value of counter 1
Control byte of counter 2
Counter setting value of counter 2
Note
Control/status byte of channel 1
Data value of channel 1
Control/status byte of channel 2
Data value of channel 2
WAGO-I/O-SYSTEM 750
I/O-IPC-C10E, CANopen Master