Digital Output Modules - WAGO -I/O-SYSTEM 750 User Manual

18.2.2

Digital Output Modules

The digital output modules use one bit per channel to represent the state of the
channel. These bits are mapped into the output process image.
If analog output modules are in the node, the digital data is grouped in bytes and
added after the analog output data in the process image.
1-Channel Digital Output Modules with Input Data
750-523
Input Process Image
Bit
7
Output Process Image
Bit
7
2-Channel Digital Output Modules
750-: 501, 502, 509, 512, 513, 514, 517 and 535 (and all variants)
753-: 501, 502, 509, 512, 513, 514 and 517
Output Process Image
Bit
7
WAGO I/O-SYSTEM 750
I/O-IPC-C10E, CANopen Master
Bit Bit Bit
6 5 4
Bit Bit Bit
6 5 4
Bit Bit Bit
6 5 4
Bit Bit Bit
3 2 1
Not used
Bit Bit Bit
3 2 1
Not used
Bit Bit Bit
3 2 1
Controls
DO 2
Channel
2
I/O Modules 197
Bit
0
Status bit
"Manual
operation
"
Bit
0
Controls
DO 1
Channel
1
Bit
0
Controls
DO 1
Channel
1