Technical Data; Table 1: Technical Data - WAGO -I/O-SYSTEM 750 User Manual

22 Device Description for the I/O-IPC
4.8

Technical Data

Table 1: Technical data

System Data
Number of I/O modules that
can be connected to the I/O-IPC
Input process image, max.
Output process image, max.
CPU
Main memory (RAM)
Internal memory (flash)
Non-volatile memory (retain)
Bios
Graphic
Memory expansion
Operating system
User-specific, real-time support
Watchdog
Approvals
UL 508
Conformity marking
Germanischer Lloyd
Interfaces
LAN
Fieldbus
I/O interface, serial
I/O interface, USB
Additional interfaces
Runtime System
Programming
IEC 61131-3
64 pieces
With internal data bus extension (optional) up to
250 pieces.
500 bytes
500 bytes
CPU Celeron® M, 1 GHz
256 MB
512 MB
1024 kB
Insyde
DVI, 1280x1024; LCD/Panel link
CompactFlash, Type I/II
Linux 2.6 with RT-Preempt patch
1024 kB PLC-SRAM with battery backup; NMI
timer
Trigger interval 400 ms
(Reset activation during time out)
Applied for
CE
60241 09 HH
2 x 10Base-T/100Base-TX
CANopen, Master
A 9-pole D-sub connector according to EIA RS-232
Two USB interfaces according to specification 2.0
Two digital outputs, isolated
Two digital inputs, isolated
CoDeSys 2.3 (WAGO-I/O-PRO CAA)
IL, LD, FBD, ST, FC
WAGO-I/O-SYSTEM 750
I/O-IPC-C10E, CANopen Master