Analog Output Modules - WAGO -I/O-SYSTEM 750 User Manual

18.2.4

Analog Output Modules

The analog output modules return 16-bit output values and 8 control/status bits for
each channel. The I/O-IPC does not use the 8 control/status bits, however, i.e., it
does not access or evaluate them.
Therefore, only the 16-bit output values for each channel are in the Intel format in
the output process image for the fieldbus of the I/O-IPC.
If digital output modules are in the node, the analog output data is mapped first
into the output process image, followed by the digital output data.
2-Channel Analog Output Modules
750-550, -552, -554, -556, -560, -585, (and all variants),
753-550, -552, -554, -556
Output Process Image
Offset
0
1
4-Channel Analog Output Modules
750-553, -555, -557, -559, 753-553, -555, -557, -559
Output Process Image
Offset
0
1
2
3
WAGO I/O-SYSTEM 750
I/O-IPC-C10E, CANopen Master
Byte Designation
High Byte Low Byte
D1 D0
D3 D2
Byte Designation
High Byte Low Byte
D1 D0
D3 D2
D5 D4
D7 D6
Note
Output value channel 1
Output value channel 2
Note
Output value channel 1
Output value channel 2
Output value channel 3
Output value channel 4
I/O Modules 203